FS: Acoustic Image Clarus+ and TEN2EX

Forum rules
Before you post on this forum read the Forum Rules in the first stickied thread. Failure to do so can result in your threads or posts to be deleted without notice.

Bumping Etiquette: You can bump your sale thread only once every 3 days. You may however add additional information to your thread or keep a discussion going when you wish.

Classifieds are now a "Supporting Member" only section. This means threads can now only be started by Supporting Members. To become a supporting member click on Paypal Donate button at the bottom of this page.

WARNING: Ozbassforum.com and its staff take no responsibilites whatsoever for any transactions that occur in this forum. Use at your own risk.
Post Reply
Posts: 198
Joined: 20 Mar 2009, 11:24
Location: Melbourne

FS: Acoustic Image Clarus+ and TEN2EX

Post by mmw » 12 Feb 2018, 15:34

Hi everyone,

For Sale:
Acoustic Image head and cab $1000 firm
Clarus+ 2 channel 500W rms class D head (Series 4)
Ten2EX 2x10 cab with tweeter

Will not separate.

Pickup in Melbourne please.

This is a fantastic sounding amp for all acoustic instruments. I've used it with violin, acoustic guitar and double bass. It's also been my electric bass amp for rehearsals where the bigger amp is not required, and for keyboard amp.

Selling as I'm trying to focus on playing electric bass, and I don't love the sound for that. It's not that it's bad, but I would never choose it over my Glockenklang rig.

Of course you don't need to play it through the Ten2EX cab, the head will take a load as low as 2ohm.

The head was purchased here from basshack. The cab I bought afterwards on ebay.

Any questions please ask :)


Some specs from http://www.acousticimg.com/docs/manual-series4.pdf

System Specs
Frequency Response 30 Hz-18 kHz (40-14 kHz ±3 dB)
Max SPL >118 dB/m (Ten2)
AC Power 100-115V/50/60 Hz or 220-240V/50 Hz,

10”x8”x3.5” (Clarus)
14”Hx15”Wx13”D (TEN2EX)

4 lbs (Clarus)
25 lbs (EX)

Amp Head
Preamp (Mic and Instrument Inputs through combo jack)
Frequency Response 20 Hz - 20 kHz (
Mic Input 600 ohm balanced, XLR connector,
switchable 10 dB pad
Phantom Power 48 volts, on/off switch w/LED indicator
Instrument Input 1 M impedance, 1/4 inch jack
Direct Out +4 dB, balanced, XLR connector, ground
lift, pre/post EQ selector
Effects Loop Parallel type with return level control
Bass Control Shelving type, ±15 dB at 60 Hz
Mid Control ±15 dB at 650 Hz
Treble Control Shelving type, ±15 dB at 10 kHz
Low Cut Filter -12 dB/octave sweepable from 30 to 400
Phase Reverse Switchable 180 degree phase reverse

Type Digital with 6 presets and level control
Program Presets 3 reverb (hall, room, plate), delay,
ambient chorus, flange

Power Amp
Topology Class D (PWM)
Switching Frequency 500 kHz

Output Power 8 ohm 300W rms continuous, 350W rms music, 500W peak transient

Output Power 4 ohm 500W rms continuous, 650W rms music, 1000W peak transient

Minimum load 2 ohms

TEN2EX cab
Woofer Dual 10 inch, one downfiring with level
control, one forward firing
Tweeter 2.5 inch forward firing with attenuation
Crossover Passive, alignment corrected
Impedance 4 ohm
Power rating 500WImageImageImageImage
Fodera Monarch 5 Deluxe; Jule Amps Monique; Glockenklang Bass Art; Acoustic Image;
Origin Effects/Eventide/Chunk Systems/FreeTheTone/Pete Cornish

Posts: 4248
Joined: 06 Feb 2010, 10:14
Location: Melbourne Victoria

Re: FS: Acoustic Image Clarus+ and TEN2EX

Post by basshack » 12 Feb 2018, 20:59

I still use AI gear, love my Glock too but the Azola sounded sweet through this amp and had to buy another one. Good price folks, for some top gear, off a nice bloke.
><((((º> ·.¸¸.·´¯`·.¸.·´¯`·... ><((((º>
.·´¯`·.¸.·´¯`·... >((((º>

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests